konfigurasi routing di cisco pacet recer

1.konfigurasi di router kiri

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int gi0/0/1
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#n sh

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/1, changed state to up

Router(config-if)#int gi0/0/0

Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#n sh

Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up
Router(config-if)#ex
Router(config)#ip dhcp pool ali
Router(dhcp-config)#network 192.168.2.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.2.1

ganti di client dengan ipdhcp

2.konfigurasi di router kanan

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int gi0/0/1

Router(config-if)#ip add 192.168.3.1 255.255.255.0

Router(config-if)#n sh

Router(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/1, changed state to up

Router(config-if)#int gi0/0/0

Router(config-if)#ip add 192.168.1.2 255.255.255.0

Router(config-if)#n sh

Router(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0/0, changed state to up

Router(config-if)#ex
Router(config)#ip dhcp pool alu
Router(dhcp-config)#network 192.168.3.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.3.1